SDWAN - BGP SERVICE VPN CONFIGURATION - USING TEMPLATE

 CONDITION 

Configure Service VPN with BGP for Remote Site communication 

Configuration Parameter

1. SDWAN Control plan and Data plan already preconfigured for connectivity

2. BGP between vEDGE and Router 

3. BGP AS Number 10 

4.Loopback1 Advertise in BGP 

5.Create BGP Template in Service VPN 

TOPOLOGY LAB

LETS START LAB - 

STEP 1 - To Create Feature Template BGP in SERVICE VPN 

The Below paramater select based on requirement 

BGP -

 Shutdown - No (Enabled BGP)

 AS Number - Device specific - It ask during Template push to Device 

 Router ID - Device specific 

 Other Parameter make Default 

Provide Redistribution OMP in BGP to get the Routes from OMP to BGP 

Now Lets configure BGP Neigbour - Put all Device Specific - will fill during apply on Device.

Now Feature BGP Template ready to call in Template , I have already below Template apply on Device 

Now Got to section Service VPN and Call BGP Feature Template here

And also got to feature template VPN 1 and enable BGP to OMP redistribution 

Now attached the template on device 

Attached Template with Device Specific Values 

Now Validate the Configuration 

First to Validate the Template enable on Device 

BGP Neigbour Status on VEDGE 

Router BGP status and Prefix learning 

Remote Site - 300 Subnet Recevied on SITE - 100

VEDGE 04 SITE 300 

SITE - 100 To SITE - 300 Communication check 

Will Continue with maniputaion in Next Blogs :)